Architect's Design Studio

Storefront and Entrances

Using the Architect's Design Studio (ADS) we can select storefront systems from many different vendors in different sizes and types.  Select front, back or center glazed and standard storefront systems from multiple different vendors.

Configure Storefront Systems:

Vendor - Configure storefront using standard metal systems from Kawneer, Efco, Tubelite and many more.

Design Stile - Aluminum system 1 or 2, front, center or back glazed.  Thermal or Non-thermal systems from light walled to heavy wall.

Entrances - Configure entrances adding hardware for push pulls, butt hinge, offset pivot, concealed exit, rim panic, locks and much more. 

Configurator- Edit your design adjusting position of verticals, horizontals, daylight openings and adding doors.

Glass - add specific glazing to each individual panel.  Spandrel, tempered, annealed, low-e and mirrors are just a few selections available..       

When selecting the storefront elevations, details of each product will be imported directly into the BIM model and in the materials list.  Framing around entrances will automatically adjust to pick up the standard door framing for the selected metal system.  Adapters and pocket fillers are added to the correct locations once an entrance is configured..

When making selections, product data is displayed to the right as well as tabs for a product model that shows the storefront elevation based on all configurations selected. 

 

Demonstration showing a storefront elevation being configured inside ADS.

 Click here to view the demonstration full screen.

 

 

 

 

 

 

 

 

 

 

 

Change color, glass and system type and see the results immediately in the model viewer of ADS.

Architect's Design Studio © Copyright 2008 - DeMichele Group - All Rights Reserved

DeMichele Group - 6432 E. McDowell Road - Mesa, AZ 85215 - (480) 985-4926 Phone -  (480) 985-3000 Fax